Dr. L.Ashok Kumar
Professor
Department of EEE
PSG College of Technology
Coimbatore


Though fate is against fulfillment
Hard labour has ready payment
(619) - Thirukural


Projects Guided
PhD Guided
  1. HARMONIC ELIMINATION IN VARIABLE FREQUENCY DRIVE USING OPTIMIZATION TECHNIQUES (D.Maheswaran - Anna University Chennai - 2015)
UG Projects
  1. Design and Development of Medishirt
  2. Automatic Tape/Cutting Cutting Machine
  3. Hi-Tech Information System for Spinning Mills
  4. Design & Development of MEMS Based Warp Stop Technology
  5. Design & Development of Speed Monitoring and Regulating System for Sewing Machines
  6. Design & Development of Pneumatic Clothing for Physically Challenged Personnel. (Adjudged as Best Project)
  7. Drugged Driving Prohibitive System- SW B.E(EEE) 2009 Batch
  8. Voice Actuated Motor Controller- SW B.E(EEE) 2009 Batch
  9. Wireless Energy Transfer- B.E(EEE) 2009 Batch
  10. Design & Development of High Efficiency 5.1 V, 18 A Power Supply for Traction Applicaiton- SW B.E(EEE) 2009 Batch (Adjudged as Best Project)
  11. Solar Powered LED Lighting System Using Lithium Ion Battery- SW B.E(EEE) 2009 Batch
  12. Design of Testing Panel for LCC & Exprot Mechanism of Circuit Breaker - SW B.E(EEE) 2009 Batch
  13. Cost Effective GPS-GPRS Based Soldier Tracking System - B.E(EEE) 2010 Batch
  14. RF Based Parking Security System - SW B.E(EEE) 2010 Batch
  15. Design of Buck-Boos Converter for Standalone Windmill- SW B.E(EEE) 2011 Batch
  16. Development of Control System for Active Dynamic Vibration Absorber- SW B.E(EEE) 2012 Batch
  17. Ethernet Based Weighing System - SW B.E(EEE) 2012 Batch
  18. Design of Real Time Alarm and PLC based Automation System for Stator and Rotor Preheating/Curing Oven - SW B.E(EEE) 2012 Batch
  19. Design and Fabrication of Solar Powered Vehicle- BE (Mechanical Engineering) 2013 Batch
  20. Design of converter for Solar PV System SW BE (EEE) 2013 Batch
  21. Design and Fabrication of Solar Powered Vehicle- BE (Mechanical Engineering) 2013 Batch
  22. Development of an instrument for Fabric GSM measurement - BE (EEE) 2014
  23. Design and Control of Servo Motor Training Module BE (EEE) - 2017
PG Projects
  1. Design & Development of Hardware Module for Flexible Solar Cells
  2. Patient Tele-Monitoring System Using Mobile Phones
  3. Efficiency Improvement on Photovoltaic Water Pumping System by Automatic Water Spraying over PV Cells - ME - Energy Engg., 2010 Batch (Adjudged as Best Project)
  4. Battery Energy Storage System for a Standalone Windmill - Based on State-of-Charge (SOC) Balancing Control - ME - Energy Engg., 2010 Batch
  5. Design of Dual Axis Sun Tracking System for Efficiency Improvement of Photovoltaic Panel - ME - Energy Engg., 2010 Batch
  6. Design of Stirling Engine and Solar Collectors for Power Generation Application - ME - Energy Engg., 2010 Batch
  7. Design, Construction and Testing of Vapour Absorption System using Solar Dish Collector- ME - Energy Engg., 2010 Batch
  8. Design and Development of Fault Tolerant Drive for Flight Control Acutators - (PT) ME - Electrical Machines - 2010 Batch
  9. Modeling of Lead Acid Battery for Hybrid Locomotive - ME - Power Electroncis & Drives - 2010 Batch
  10. Design of Power Supply for Remote Devices using Solar Energy - ME - Power Electroncis & Drives - 2010 Batch
  11. Design of High Efficient Single phase Transformerless Inverter for PV System - ME - Energy Engg.,- 2011 Batch
  12. Design of High Efficient Concentrated PV/T Module by Spectral Absorption Using Water - ME - Energy Engg.,- 2011 Batch
  13. Design, Implementation and Monitoring of Wind Turbine for Domestic Applicaitons - ME - Energy Engg.,- 2011 Batch (Adjudged as Best Project)
  14. Analysis, Design and Verificaiton of High Frequency MOSFET Gate Drivers - ME - Power Electroncis & Drives - 2011 Batch
  15. Design and Development of 27- stage Multilevel Inverter for Solar PV System - ME(PT) - Electrical Machines - 2012 Batch
  16. SCADA Based Biogas Plant - ME(PT) - Electrical Machines - 2012 Batch
  17. Design and Development of a Single Phase Reduced-Source Multilevel Inverter for Hybrid Electric Vehicle - ME(PT) - Electrical Machines - 2012 Batch
  18. A Novel Nine-Switch Converter for Solar Energy Generation Systems - ME - Power Electroncis & Drives - 2012 Batch
  19. Solar Microinverter- ME - Power Electroncis & Drives - 2012 Batch
  20. Design of Power Converter for Traction Energy Storage and Utilization Systems- ME - Power Electroncis & Drives - 2012 Batch
  21. Analysis and Implementation of an Integrated SEPIC Forward Converter for PV Based LED Lighting - ME - Energy Engineering - 2012 Batch
  22. Performance Enhancement of a Photovoltaic Module Using Solar Functional Coatings- ME - Energy Engineering - 2013 Batch
  23. Power Generation Using Magnetic Wind Turbine ME - Energy Engineering - 2013 Batch.
  24. Design and Development Of Bypass Option for Variable Frequency Drives-ME - Power Electronics & Drives - 2013 Batch.(Adjudged as Best Project)
  25. Design of DC-DC Converter for Series Hybrid Vehicle- ME - Power Electronics & Drives - 2013 Batch.
  26. Design of Harmonic Filter for Harmonic Reduction in Variable Frequency Drive- ME - Power Electronics & Drives - 2013 Batch.
  27. An Inverter Implementation For Solar PV Application Utilizing dSPACE DS1104 - ME - PED - 2014 (Adjudged as Best Project)
  28. Power Quality Measurement, Assessment and Mitigation In Solar Power Plant - ME - PED 2014
  29. Hardware implementation of Transformerless inverter for PV systems- ME - PED - 2014(Won the Best Innovator Award from M/s. Danfoss, Chennai)
  30. Design & development of hot standby Option for variable frequency drives - ME - PED - 2014
  31. Design of a Current Control Scheme for a Grid Connected VSI Via LCL Filter Using PLL- ME - PED - 2014
  32. Mutli Input Power Converter for Renewable Energy Sources - ME - PED - 2014
  33. Conveyer with linear SRM Drives Actuation Systems- ME(PT) - Electrical Machines - 2014
  34. Design of Z-Source Inverter for using Hybrid Application - ME(PT) - Electrical Machines 2014
  35. Design and Implementation of Advanced Harmonic Filter for Danfoss Drives- ME - PED 2015.
  36. Power Quality Improvement of Grid-Connected Wind Energy System Using FACTS Devices- ME - PED 2015(Adjudged as Best Project)
  37. Dead-Time Harmonic Elimination in Solar PV Inverters- ME - PED 2015.
  38. A Compact Welding Machine with Power Factor Correction- ME - PED 2015.
  39. Predictive Current Control Based PMSM Drive For HVAC Applications- ME - PED 2016.
  40. Design of Droop Control Technique to Improve Voltage and Frequency Stability in a Microgrid During Autonomous Mode of Operation- ME - PED 2016.
  41. Lithium Ion Battery Management System for Electric Vehicles- ME - PED 2016.
  42. A LabVIEW based Environmental Monitoring System for Desiccant Loop Air Cooling System (DLACS)- ME - AE (PT) 2016.
  43. Design of Wind Turbine Emulator using Speed Controlled DC Motor- ME - AE (PT) 2016.
  44. Design and Comparison of BLDC Motor for Water Pump Application- ME - EM (PT) 2016.
  45. Design of 2.2 kWp Solar Photovoltaic Fed Induction Motor for Agricultural Pump Applications -ME - PED 2017
  46. Real Time Implementation of Boost Converter with Different PV Panel Technologies for Solar Roof-Top Application -ME - PED 2017.
  47. Modelling and Simulation of Multi-Level VFD for 4 MW Three Phase Induction Motor Using Sliding Mode Control -ME - PED 2017.(Adjudged as Best Project)
  48. Design and Development of Power Optimizer Using Sliding Mode Control for an Existing String Inverter for Domestic Application -ME - PED 2017.